Familiar with the tool structure and function
Before using the Handheld power tools Wallpaper machine for the first time, be sure to read the product manual carefully and fully understand the functions and uses of its various components. Familiar with the switch position, speed adjustment button, glue application device and other key parts of the wallpaper machine. Know how to install and replace the blade so that you can operate it quickly and correctly when needed. For example, clarify the applicable wallpaper types corresponding to different speed gears. Low speed gear may be more suitable for thin and fragile wallpapers, while high speed gear can be used for thicker wallpapers to avoid damaging the wallpaper or affecting the pasting effect due to incorrect use of speed gears.
Wall and wallpaper preparation
Wall pretreatment is an important prerequisite for using the wallpaper machine. Make sure that the wall is flat, dry, clean, and free of dust, oil and loose materials, otherwise it will seriously affect the adhesion of the wallpaper. For walls with cracks or potholes, they need to be repaired and leveled in advance. At the same time, it is also very important to cut the wallpaper correctly. According to the height and width of the wall, reserve an appropriate margin. Generally, reserve 5-10 cm more at the top and bottom for subsequent trimming. When installing the wallpaper on the wallpaper machine, make sure that the wallpaper is flat and wrinkle-free, and that it is firmly installed to prevent the wallpaper from slipping or shifting during the installation process.
Key points during operation
When starting to install the wallpaper, the handheld wallpaper machine should be kept stable and perpendicular to the wall, and pushed at a uniform speed. Pay attention to the amount of glue applied. Too much may cause bubbles or wrinkles on the wallpaper, while too little will affect the adhesion. When pushing the wallpaper machine, pay attention to the fit between the wallpaper and the wall, and adjust the direction and strength in time. When encountering corners or edges, slow down and operate carefully to ensure that the wallpaper can fit the corners tightly to avoid gaps. If bubbles are found in the wallpaper, stop immediately and use a scraper or soft cloth to gently squeeze from the center of the bubble to the edge to expel the bubble.
Safety and finishing work
Safety is always the top priority. When using for the first time, make sure that the power connection is correct and stable to avoid entanglement or pulling of the wires. Wear protective gloves and goggles to prevent accidental injuries during operation. After finishing the wallpapering, turn off the wallpaper machine in time and clean the residual glue and wallpaper debris. Perform simple inspection and maintenance on the wallpaper machine, such as wiping the blade and cleaning the glue outlet, to prepare for the next use. At the same time, check the paving effect and make appropriate repairs to the uneven or defective areas to ensure the overall beauty and firmness of the wallpaper.
When using the Handheld power tools Wallpaper machine for the first time, strictly follow these operating points to help users complete the wallpaper paving work smoothly, while ensuring operational safety and wallpaper pasting quality.
